918博天娱乐(中国)官方网站

Info:
Composition: spunbond outer layer, high efficiency meltblown middle filter layer, with adjustable nose clip and flexible band ear-loop.
 Performance: in accordance with GB19083-2010 standard(CHINA MEDICAL PROTECTIVE RESPIRATOR STANDARD), efficiency meet to class 1(>=95%)
•Share: 
•Introduction 
Product name:  Medical Protective Respirator
Product code： TDN95-Z02
Composition: spunbound outer layer, high efficiency meltblown middle filter layer, with adjustable nose clip and flexible band ear-loop.
Performance: in accordance with GB19083-2010 standard(CHINA MEDICAL PROTECTIVE RESPIRATOR STANDARD), efficiency meet to class 1(>=95%)
Application: For use in a medical environment to provide a physical barrier against airborne                particulates as well as blood and other bodily fluids.
Note:
1. This product is EO sterilized .
2. This product is disposable. Please check the package before use. If the package is damaged, it should not be used. Please use as soon as possible after opening.
3. Please refer to the instructions before use. Avoid hand contact with the inside of the mask.
4. It is recommended to use for 4 hours and replace at any time when polluted or wet.
5. The discarded mask should be treated as medical waste and should be descrded appropriately.
6. Please stop using immediately if you feel unwell during use.
Storage conditions: store in a room with relative humidity no more than 80%, no corrosive gas and good ventilation, and keep away from pollution sources.
Contraindications: those who are allergic to non-woven fabrics should be careful.
Production date：See inner package seal
Shelf life：one year
DO NOT REUSE
Instructions:
1.Remove the mask and gently pull the mask ears band.
2.Place the nose clip over the bridge of the nose and hang the ear strap over the ear，
adjust the ear band to a comfortable state.
3.Use your forefinger and middle finger to press the nose clip to make it close to the face , mask with both hands for testing its tightness.

Manufacturer / Registrant / After-sales Service Unit:
TIANJIN TEDA FILTERS CO.,LTD
Address of manufacturer:
 No.45, The 7th Xinye Street, West Zone of TEDA, Tianjin, China
Manufacturer Contact:
Tel: 86-22-66321865 
Fax: 86-22-66321877
Postcode: 300462
Website: www.maituanyoupin.cn